 |
Easy Step for Allis D17
tractors. Attaches to left foot rest. Manufactured locally and
simple to install. Requires
drilling one ½ inch whole. Steps for other D
Series tractors available.
Click for close up pictures.
#1253
|
 |
Tractor covers now available from
Chats Tractors. Sparrows and the sun can ruin a nice paint in a
matter of weeks so we decided that we needed more protection from
the elements. We found a local gentleman that is making these
covers in the USA. We can get covers for most makes and
models. Priced according to size. Muffler and air cleaner covers are
included as is a Velcro seal around the muffler and air cleaner.
Click for close up pictures.
# 1378 |
 |
We are now a dealer
for “Pop Up” Gooseneck adapters. Call us for pricing and
delivery options
|
 |
Dick and Bob are selling their Aunt’s
“like new” Poulan riding lawnmower. Powered with a 14.5 horse
Industrial/commercial Briggs engine. Fully adjustable 38 inch
cutting deck with 5 speed transmission. New 12volt battery, Sears
easy empty grass catcher, lights for night mowing, rear hitch for
towing. Has been garage kept, well maintained and properly serviced.
Delivery available. Click for close up pictures.
# 1388 |
|
 |
Hard to find 2 point
fast hitch to 3point quick hitch conversion. Will fit Farmall and
international utility and
row crop tractors equipped with 2 point hitch.
Click on the image for larger pictures.
# 1143 |
|
 |
New from Chats.
2 point to 3 point adapter kit. Converts IH 2
point fast hitch to standard 3 point. category 1 or category 2
equipment. Kit includes two lift arm inserts, top link bracket
and top link.
Click on the picture for close up.
# 1224 |
 |
3-point hitch attachment, fits Allis Chalmers WD,
WD-45 #1257
For D14, D15 and D17 tractors #1258 |
 |
Painted Clamshell Fenders to fit Farmall tractors H through 450.
Includes mounting brackets, fender spacers and attaching bolts.
Click on the image for larger pictures.
#1096 |
 |
Refueling Steps, They
make refueling a lot easier! These steps bolt into existing
slots on frame rails of all older models (1939-1957). 460, 560
and newer series will require drilling one 5/8 inch hole for
mounting. These are very heavy duty and do not bend when jumped
on ! Includes two 5/8 inch mounting bolts. Hard to see in
picture but they do not sit lower than the oil pan so there is
plenty of clearance. These steps are manufactured locally.
# 1255 |
 |
IH 2 point fast hitch 7
foot scrape blade. We also have 6 foot and 8 foot blades
in stock. #1037 Click on the
picture for a larger image. |
 |
6 foot AC snap coupler adjustable scrape blades
available. We
have several in excellent condition.
Click blade for larger pictures. |
 |
Several AC plows on hand. 2 -3 and 4
bottoms. Old style WD pin hitch, snap coupler for WD and WD45
tractors, newer style snap coupler for D series tractors and 3-point
hitches, both full cover and slatted bottoms, fully mounted and semi
mounted. Click plow for larger pictures. # 1399 |
 |
Allis Chalmers 4 bottom fully mounted
snap coupler plow. Good shears and cutters. Click plow for larger pictures. # 1394 |
 |
8 foot adjustable rear scrape blade
to fit an Allis Chalmers snap coupler hitch. Used but in excellent
condition. Can be used to push or pull material.
Click blade for larger pictures. #
1386 |
 |
Factory 4 bolt wide front axle
assembly for Allis Chalmers WD45 Diesel tractor. Complete with
rear mounting bracket. Comes with or without tires and wheels.
Click wheels for larger pictures.
# 1373
Our Current Ebay Auctions |
|
 |
Several 3 point 6 foot adjustable rear scrape blades.
Email for pictures #1060 |
|
Our Current Ebay Auctions !! |
|
 |
New, from Chats Throttle lever and hydraulic control
lever “KNOBS” for Allis Chalmers WD 45 tractors. Click to see
them on the levers.
# 1226
|
 |
Two row AC snap
coupler rear mount cultivator, adjustable row width gangs. Will
fit most all AC’S with snap coupler hitch.
Click on cultivator for close up pictures.
#1341 |
 |
We presently have in
stock several nice pull type and 3 point hitch bush hogs. 5
6 and 7 foot sizes. Can be picked up at our place or delivered
to yours.
Click on cultivator for close up pictures.
#1387 |
 |
Ford Dearborn #10-1,
3pt 2x14 plow, will work on most 3pt. Cat.1 tractors.
Click on the image for larger pictures.
#1167 |
 |
Just in time for
Spring cleanout. JD Model L Ground Drive Manure Spreader. Good,
floor , chains and tires. Click
on the plow for larger pictures.
#1391 |
 |
2 bottom # 8
trip plow. Click on the plow for larger pictures.
#1173 Sale Pending |
 |
2 bottom 2pt/3pt IH
fast hitch plow. Click on the picture for a larger image.
#1036 |
 |
3 bottom #8 trip plow
Click on the plow for larger pictures.
#1175 Sale Pending |
 |
Case 2 bottom 14 inch pull plow with
trip lift, very good overall condition. With good shears and
cutters. On steel wheels. Click on the plow for larger
pictures.
# 1383 |
 |
2 bottom trip plow on
steel. Click on the image for larger
pictures.
#1174 |
 |
Massey Ferguson 3 point hitch 7 foot
sickle mower. Standard 540 PTO drive, fits Cat. I 3 point hitch
tractors. Mows well on steep banks and around lakes and ponds.
Click on the image for larger pictures.
# 1382 |
 |
IH Model M 10 foot grain drill with
grass seed attachment. Hydraulic lift . Comes with original
operators manual. Needs minor repair. Click on the image
for larger pictures.
#1381 |
 |
8 foot pull type disk
harrow, no 3pt . hitch required, good blades and bearings,
weight racks, fully adjustable, great for small acreage.
Requires a minimum of 30 horse power tractor. Click
on the image for larger pictures.
#1380 |
 |
Now available from
Chats Tractors. Tractor steering wheel covers. These covers Fit
16,17 and 18 inch diameter tractor steering wheels. $12.00
#1265 |
 |
4 rear IH
split wheel weights
part #365321R2. They weigh 60lbs each, will fit IH 300 utility and 350
utility plus other makes with 28 inch rear wheels. We have 2
sets of these weights.
Click on the image for larger pictures.
#1169
|
 |
Heavy Duty Allis / New Idea hydraulic
frontend loader. Heavy frame with 6 1/2 foot wide deep bucket
bucket. Mounting brackets for Allis D17 . complete with all
attaching brackets, cylinders, and hoses.
Click on the image for larger pictures.
# 1355 |
|
John Deere Model 45 front end loader in very good condition. Two
cylinders with trip bucket.
Click on the image for larger pictures. #1095 |
 |
Freeman #8 trip bucket loader for an Allis D14.
Complete with 42 inch bucket, mounting brackets and lift
cylinders. #1009
|
 |
AC front end loader
complete with sub frame and lift cylinders to fit AC WD45. |
 |
AC #303 Baler. Click on the image for more
pictures.
#1193
|
 |
Allis Chalmers Forage Harvester Click on the image for more
pictures.
#1194 |
 |
One owner Massey Harris Clipper
pull type combine. 6 foot header, swing out pull hitch for pulling
wagon along side. Hydraulic control header, needs canvas drapper
and three reel batts to make field ready. Original operators
manual included.
Click on the picture for close up.
# 1204
|
 |
New Idea hay loader from the past.
Would make a great lawn
ornament or can be used for loading loose hay onto a wagon as you
pull it through the hay field. No more heavy, back breaking bales to
lug around. Just feed it loose from the wagon. Requires minor repair
before use. #1353 Click on the image for larger pictures. |
 |
John Deere 2 row front
mount cultivators.
Click on the image for larger pictures.
#1041 |
 |
Old John Deere
2 row planter on steel.
Click on the image for larger pictures.
#1043
|
 |
Hand crank for AC WD
and WD 45 tractors. #1259 We have several of these available
|
 |
IHC antique tractor
wrench. Part #45662-DA 1" boxed end x 1 1/8" boxed end 12
inches long #1260 |
 |
Pair of Allis Chalmers
snap couplers lift arm latches that will fit Allis Chalmers WD
up to D-17-19 series with the snap coupler hitch. They are in
good condition. Nothing is broken. They open and close just
fine. We have multiple sets of lift latches.
Sold Individually #1261 |
 |
AC seat back rest. Will fit WC,
WD ,WD45 and other tractors with similar pan seats. Click on the
picture for close up. #1172 |
 |
Allis Chalmers WD and WD45 Standard
size Belt Pulley.
# 1181
|
 |
New stock clutch/brake shaft for Farmall Super M, Super MTA, 400 and 450 Farmall tractors.
Click on the picture for a larger image.
#1164 |
|
 |
Wide front rear support
bracket for Allis Chalmers WD45 Diesel Tractor.
Click on the picture for a larger image.
#1163 |
 |
International
Harvester Disk plow with three
24 inch disks and steel wheels in good working order. Click on the picture for
a larger image. Item #1032 |
 |
Lot of Misc AC Parts. Click on the image for more
pictures. |
 |
2 used front wheel assist axle assemblies off of
Compact tractor (Brand unknown). One has a broken outer housing.
5inch hubs, 4 wheel studs, 14 spline 3/4 inch input shaft
#1211 |
